Active Topics


Author Topic: Z1000SX - 2017 Code 27 ABS issue after tire swap  (Read 139 times)

0 Members and 1 Guest are viewing this topic.

Offline Hawaii

  • SX Junior
  • *
  • Posts: 2
  • Country: Sweden
So i run a tire shop in my garage.
I changed front and rear tire on a 2017 Z1000SX.
By mistake i mounted front wheel with the ABS disk on the wrong side.
Customer drove home and came back saying the ABS indicator is showing.
I turned the wheel around and the disk is now in the correct position. Nothing was damaged and everything is OK mechanically.
I retrieved the error code and it shows 27 - Front ABS sensor malfunctioning.

I tried tor drive it for 3km stopping and taken out key. Driving 3km more same thing. I also drove 20km took out key and 20km more and took out key.
I also disconnected battery.
Still have an error.

I assume I have to reset the error code some how.
Also if anyone know how to change from mph to Km (I don't have a manual)

Anyone have an idea?



#1

Offline Hawaii

  • SX Junior
  • *
  • Posts: 2
  • Country: Sweden
Re: Z1000SX - 2017 Code 27 ABS issue after tire swap
Reply #1 on: 18 May 20, 12:13:06
Problem solved

Uppdate.
    Drove 5km stop, remove key
    Drove 5km stop, remove key
    Drove 3km stop, remove key
    Drove 3km stop, remove key
    Drove 20km stop, remove key
    Drove 20km stop, remove key
    Drove 20km stop, remove key. + break on gravel. ABS works(probably did the whole time)
    Drove 5km stop, remove key
    Error lights gone