Active Topics


Author Topic: assistance required please  (Read 2300 times)

0 Members and 1 Guest are viewing this topic.

Offline psi1001

  • SX Master
  • ****
  • Posts: 496
  • Bike: z1000sx
  • City / Town: basildon
  • Country: england
assistance required please
on: 11 Feb 12, 12:27:24
Hi
Have been trying to fit my aftermarket pipes today
left side fitted fine but on right side there is something connected (i Thinks butterfly valves)
but on new pipe not  there.
what do i do with these, are they required, if not how do i remove.
bike currently up on paddock stands waiting
many thanks
Tony
Last Edit: 11 Feb 12, 12:35:18 by psi1001
Keep it safe, keep it secure

#1

Offline Mat7

  • SX Member
  • **
  • Posts: 43
  • Country: uk
Re: assistance required please
Reply #1 on: 11 Feb 12, 01:35:24
You need to take the riders seat off and you will see a servo with the cables coming up to it - remove the cables and leave the servo connected or the fuel injection will get upset. the cables then pull through and the exhaust will come free!

cheers
Matt

#2

Offline psi1001

  • SX Master
  • ****
  • Posts: 496
  • Bike: z1000sx
  • City / Town: basildon
  • Country: england
Re: assistance required please
Reply #2 on: 11 Feb 12, 01:37:54
Cheers Matt
i will give that a go
Tony
Keep it safe, keep it secure

#3

Offline Fast Black

  • SX God
  • *****
  • Posts: 1848
  • Bike: Shiny Black/Grey
  • City / Town: Carlisle
  • Country: England
Re: assistance required please
Reply #3 on: 11 Feb 12, 06:41:33
Tony there are cable tentioners half way down the cables so you can loosen them off before hooking them off the wheel under the seat.
Remember to keep it rubber side down & shiny side up.........stay safe.

#4

Offline psi1001

  • SX Master
  • ****
  • Posts: 496
  • Bike: z1000sx
  • City / Town: basildon
  • Country: england
Re: assistance required please
Reply #4 on: 11 Feb 12, 07:50:49
all off now and new cans fitted
Keep it safe, keep it secure

#5

Offline Hinchy

  • SX Master
  • ****
  • Posts: 855
  • Bike: Z1000SX 16-05-11
  • City / Town: Stroud, Glos
  • Country: UK
Re: assistance required please
Reply #5 on: 11 Feb 12, 07:57:13
looking good psi.  bet it was cold fitting em.  Things you do for love !

deserves an applaud for the dedication.  :062:
The Future's so bright, you have to wear shades ! :018:

#6

Offline psi1001

  • SX Master
  • ****
  • Posts: 496
  • Bike: z1000sx
  • City / Town: basildon
  • Country: england
Re: assistance required please
Reply #6 on: 11 Feb 12, 08:01:43
very cold but had my all in one thermal suit on.
tried to give her a bath as covered in salt but water kept freezing on bike bit cleaner but does need a full deep clean.
cant wait to strip down ready for the dryer months
Keep it safe, keep it secure

#7

Offline Squashed

  • SX God
  • *****
  • Posts: 1018
  • Bike: Z1000SX GREEN
  • City / Town: North of Watford
  • Country: England
Re: assistance required please
Reply #7 on: 16 Feb 12, 08:03:47
Tony, are they SP Engineering pipes? The picture is very small and I can't see it very well.

I was thinking of getting the SP pipes and wonder what they are like, particularly the quality and amount of noise.
Watch out where the huskies go
And don't you eat that yellow snow

#8

Offline psi1001

  • SX Master
  • ****
  • Posts: 496
  • Bike: z1000sx
  • City / Town: basildon
  • Country: england
assistance required please
Reply #8 on: 16 Feb 12, 08:45:44
Yes mate
Sp cans
If you look on eBay they are using my bike for pics
Sound is good with baffles in. I like with baffles out but every day early mornings is a bit much
Overall very good and good price
Keep it safe, keep it secure

#9

Offline burty

  • SX God
  • *****
  • Posts: 2278
  • City / Town: Rochester, Kent
  • Country: UK
Re: assistance required please
Reply #9 on: 16 Feb 12, 10:35:57
Nice :)
2017 Z1000SX, in black.  Roughly 70000 miles and 8 years on SXs.